How to Install Windows 11 – Step-by-Step Guide (2027)
If you are upgrading an existing Windows 10 operating system to Windows 11, see below.
If you are clean installing Windows 11 using bootable installation media, click here.
If you are activating Windows 11 or upgrading to Windows 11 Pro for Workstations, click here.
Explore the full benefits of linking your Windows license to your Microsoft account.
Our installation guide covers Windows 11 Home, Windows 11 Pro, and Windows 11 Pro for Workstations. The activation and upgrade examples below use Windows 11 Pro for Workstations, including upgrading from Windows 11 Home or Pro.
I. UPGRADING AN EXISTING INSTALLATION OF WINDOWS 10 TO WINDOWS 11
Use this section to upgrade a compatible PC from Windows 10 to Windows 11. Save your work and back up important files before you begin. The Installation Assistant below is for 64-bit PCs (Intel or AMD).
1. Download the PC Health Check app and select Check now to check your PC’s compatibility with Windows 11.

2. If your PC meets the Windows 11 requirements, continue below. Otherwise, review the results in PC Health Check to see what needs attention. If TPM 2.0 is supported but disabled, follow Microsoft’s instructions to enable TPM 2.0 and run the check again.

3. Visit the official Windows 11 download page, then download and run the Windows 11 Installation Assistant. Your PC needs Windows 10 version 2004 or later and at least 9 GB of free space for the download.

4. Review the license terms and select Accept and install. The assistant will download and install Windows 11. The time required depends on your PC and internet connection.

5. When prompted, select Restart now to continue the installation.

6. Keep your PC switched on while Windows completes the upgrade. It may restart several times before returning to the desktop.

7. Congratulations! You are now on Windows 11. If Windows 10 was already activated before the upgrade, Windows 11 should activate automatically with the same edition. To activate Windows 11 or upgrade to Windows 11 Pro for Workstations, follow the activation and upgrade instructions below.

II. WINDOWS 11 CLEAN INSTALL GUIDE
Use this section to install Windows 11 on a new PC or start fresh on an existing PC. Prepare a blank USB flash drive with at least 8 GB of storage. Back up important files from the PC and USB drive first: creating the installer erases the USB drive, and a clean installation removes data from the Windows installation drive.
1. Visit the official Windows 11 download page. Under Create Windows 11 Installation Media, download and run the Media Creation Tool. This tool creates installation media for 64-bit PCs (Intel or AMD).

2. Review the license terms and select Accept. Choose your language and leave the edition set to Windows 11. To change the suggested language, clear Use the recommended options for this PC. The installed edition is selected during setup or detected automatically. Select Next.

3. Connect the blank USB flash drive to your PC. Select USB flash drive, then select Next.

4. Select the correct USB drive from the list, then select Next. Check the drive carefully because the tool will erase its contents.

5. Wait while the tool downloads Windows 11 and prepares the bootable USB installer. The time required depends on your PC, USB drive, and internet connection.

6. When the tool confirms that your USB flash drive is ready, select Finish. Your Windows 11 installer is ready to use.

7. Connect the USB installer to the PC where you want to install Windows 11, then restart the PC.
8. Open your PC’s boot menu during startup and select the USB installer. The boot-menu key varies by manufacturer, so check your PC or motherboard documentation. For detailed instructions, see How to Boot From USB to Install Windows.
9. On Select language settings, choose your installation language and time and currency format, then select Next.

10. On Select keyboard settings, choose your keyboard layout, then select Next.

11. On Select setup option, choose Install Windows 11. After confirming that your important files are backed up, tick the box agreeing that files, apps, and settings will be deleted, then select Next.

12. On the Product key screen, enter the 25-character Windows 11 product key from your order, then select Next. Windows Setup automatically selects the edition that matches your key.
For Windows 11 Pro for Workstations: Select I don’t have a product key instead, then follow step 13 to install Windows 11 Pro or Home first. You will use your Workstations key to upgrade and activate Windows after installation.

13. For Windows 11 Pro for Workstations only: On Select Image, choose Windows 11 Pro or Windows 11 Home, then select Next. The screenshot below shows the Home option. After installation, use your Workstations product key with the activation and upgrade instructions below.
If Setup already selected the edition from your Home or Pro key, skip this step and continue to step 14.

14. On Applicable notices and license terms, review the terms and select Accept to continue.

15. On Select location to install Windows 11, identify your intended installation disk by its size and partition details. A label such as Disk 0 identifies a physical disk; the partitions listed under it are sections of that disk. The USB installer may also appear as ESD-USB, so make sure you select your PC’s internal drive.

16. For a fully clean installation, select each partition only on the installation disk you have backed up and choose Delete Partition. Leave the USB installer and other disks unchanged. Select the resulting Unallocated Space, then select Next. On a new, empty drive, simply select its unallocated space. Windows creates the partitions it needs automatically.

17. On Ready to install, confirm the edition before selecting Install. For a Windows 11 Home or Windows 11 Pro purchase, it should match your key. For the Windows 11 Pro for Workstations upgrade, it should show the Pro or Home edition you selected in step 13. Keep nothing confirms the clean installation.

18. Keep your PC powered on while Windows installs and restarts. Complete the on-screen setup for your country or region, keyboard, network, account, and privacy preferences. Once you reach the desktop, continue with the activation and upgrade instructions below to check activation and Microsoft account linking, or complete your Windows 11 Pro for Workstations upgrade.
AFTER THE RESTART: Let the PC boot from its internal drive. If the USB setup screen appears again, remove the USB installer and restart, or select Windows Boot Manager in the boot menu.
III. ACTIVATE OR UPGRADE WINDOWS 11 AND LINK YOUR LICENSE TO YOUR MICROSOFT ACCOUNT
This example shows how to upgrade from Windows 11 Home to Windows 11 Pro for Workstations, then link the activated license to your Microsoft account. You can also use your Windows 11 Pro for Workstations product key to upgrade from Windows 11 Pro. For Home or Pro licenses: If your purchased edition is already activated, go straight to step 7 to check activation and Microsoft account linking. If the installed edition matches your key but is not yet activated, follow steps 1–4 and the activation prompts, then continue to step 7.
1. Save your work, back up important files, and connect your PC to the internet. Install any pending Windows updates and have your 25-character product key ready.
2. Open Start, search for Activation settings, and open it. You can also go to Settings > System > Activation.

3. Beside Change product key, select Change.

4. Enter the product key from your order, then select Next. For this upgrade example, use your Windows 11 Pro for Workstations key. The key shown in the screenshot is a placeholder.

5. When Upgrade your edition of Windows appears, select Start to begin the upgrade to Windows 11 Pro for Workstations. If you are activating an edition already installed on your PC, follow the activation prompt and continue to step 7.

6. Let Windows finish adding the new features. Keep your PC switched on and allow it to restart if prompted. Wait until you are back at the desktop before continuing.

7. Go to Settings > System > Activation. Confirm that the activation state is Active and the edition matches your license. For this upgrade example, the edition should read Windows 11 Pro for Workstations. If your digital license is already linked to your Microsoft account, skip to step 11. Otherwise, continue below.

8. Open Settings > Accounts > Your info.

9. Select Sign in with a Microsoft account instead.

10. Sign in with the Microsoft account you want to link to this PC and complete any verification prompts. Enter your current Windows password when asked, then complete Windows Hello setup if prompted.

11. Return to Settings > System > Activation and expand Activation state. Confirm that it says Windows is activated with a digital license linked to your Microsoft account. Your activation and account linking are complete.

If an upgrade error appears, restart your PC once and check the edition and activation state again. If the issue remains, contact our support team with the error message so we can help you complete the upgrade.
Explore the full benefits of linking your Windows license to your Microsoft account.


